Quickstart notes on Chuck Yakym's 1802 monitor program MCSMP20 and RCA BASIC3 - April 14, 2018

Program an EPROM with the following BIN files, and address it at the following memory locations
to run them on your 1802 Membership Card or other 1802 ELF computer:

NOTE:
Membership Card Rev. I and earlier use either the MCBASIC3.bin, MCSMP20.bin, or MCSMP20A.bin file
Membership Card Rev. J and above use either the MCBASIC3J.bin, MCSMP20J.bin, or MCSMP20B.bin file


 - Load MCBASIC3.bin or MCBASIC3J.bin (16k bytes) into memory starting at address 0000h
   BASIC3 expects to see RAM starting at address 8000h

 - Load MCSMP20.bin or MCSMP20J.bin (32k bytes) into memory starting at address 8000h
   MCSMP20/J expects to see RAM starting at address 0000h

 - Load MCSMP20A.bin or MCSMP20B.bin (32k bytes) into memory starting at address 0000h
   MCSMP20A/B expects to see RAM starting at address 8000h

For the MCBASIC3.bin please refer to the BASIC3v11user.PDF file. 
For the MCSMP20.bin please refer to the MCSMP20.PDF file.

Enjoy,

Chuck <the-eagle@att.net>
4/14/18